You are currently browsing comments. If you would like to return to the full story, you can read the full entry here: “Blackberry Unlock using mml 2.0.1.3”.
Search
Login
Donate
If my site helped you in any way, please consider a donation.
You are currently browsing comments. If you would like to return to the full story, you can read the full entry here: “Blackberry Unlock using mml 2.0.1.3”.
Hey Kush,
Thanks for all the help you are rendering.
But I tried all the steps as per the instructions :
Installed the BB desktop soft > Dotnet 2.0 > BB Rogers file > Deleted the apploader file > Installed the MML 1.8 version > Replaced the MML folder in C :
When connected the BB without the SIM and Media Card , gives me the error
That MFI FILE NOT FOUND ON THE LOCAL DRIVE.
I trying to unlock my BB BOLD 9000 [ Rogers ]. Can you suggest What I am doing wrong.
Thanks for all your help.
Hey K910, seems that you have not replaced the files inside the mml folder properly. I say this because the Bold 9000 should be an easy phone to unlock. I’ve done more than 10 with no problem just connected it and worked. Let me know if this helps, if not I can help you Troubleshoot.
Help.. where can i find that xml file that needs to replace the other one?
Can u help me please?
Help.. where can i find that xml file that needs to replace the other one?
Can u help me please?
Would be great..
I just did the same thing and now no matter whether I use the 1.8 or 2.0 version I get an error with a flashing X in the box and the error “PIN: 00000000
Attempted to read or write protected memory. This is often an indication that other memory is corrupt”
What do I do to reload the blackberry software? I can’t use the desktop manager because it doesn’t recognize the blackberry with no PIN.
Hi K910, I downloaded somewhere a program called BB-UNLOCKER, it came with the 2.0.1.3 MFI MML program also, both where installed Ok but I am still afraid to use them, how do I know if I have the OS in my BB Desktop, how do I reload the OS, what about the factory settings, the brand and all that stuff, is it safe, sorry but I am not very technic about cell phones , can you help me.
Thanks in advance,
TEEH
Hey Thor, on June 21st,
You probably shouldn’t try using MML or BB-UNLOCKER since MML requires some ingenuity and familiarity with the BB and the desktop software and if you have no idea what your backup ipd files are or where they are…… then you’re bound to fug up MML no matter what.
More than likely, the same darwinistic forces that preclude you from understanding most of your household appliances and likely one of the primary sources of your misery whether your toaster or battery powered sticky device kept in your nightstand…..is a symbolic reminder of this advice.
You, really, just need to bite the bullet and pay for your unlock codes Ray Charles and myself can see this train wreck coming if you tried using unsanctioned software to unlock your phone.
Don’t listen to me, instead just remember the last time you tried to do something out of bounds with an electronic device then scratch the resultant scar on some part of your body that resulted from the electrical burn, exploded battery or the sore knuckle in your hand from the wall you punched in frustration.
You wanker.
I THANK YOU MUCH KUSH!!!!! your tutorial worked perfectly. I unlocked my sons BB 8800 without a stutter. Your work is greatly appreciated. Peace.
Kush,
The MML just not RUN, do you know what can be?
Installed .NET 2.0 and try to run 1.8.0.0 (show huge error) and 2.0.0.0 MML (Open, but not connect on the phone)
Any idea what can be?
can i flash the 9630 bold blackberry cdma?want to change the service to metropcs i know how but dos this program will unlock it for me or do i need the mfi file………………………ty
No i would not try it with a Blackberry 9630 Bold Cdma.
i tried with my BB 8707g, everything goes ok with mfi multiloader 1.8.1.3 but at the end the network is still locked, what can be the problem, is 8707g phone not supported with this software, please reply if any suggestion
This is what happened when i ran the app. BlackBerry Bold 9000 using mml 2.0.1.3.
Unable to cast COM object of type’RIMRADIOCOMLib.RIMRadioObjectClass’ to interface type ‘RIMRADIOCOMLib.IConnection’this operation failed because the queryinterface call on the com component for the interface with iid (fe9513a0-9002-11dd-baea-0002a5d5c51b)failed due to the following error :no such interface supported (expection from HRESULT :0×80004002 (e_nointerface).
Did you disable your internet connection before running the program? If you did and it still says online, You might have hamachi installed. I had to disable connection on a friend’s computer to get it working.
I am soooo lost I have the Blackberry Bold Model:RBT71UW and the sticker indicates its a 9000. I get this error:
Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
YIKES….any suggestions would be very helpful. I am running win XP SP3
Soory i should further ad to that…I am running MML V 2.0.1.3
Hey Steve, I saw that you said 2.0.1.3 could you please try running it with 1.8.1.3. I found that this works better, if you still have this problem let me know we can troubleshoot more.
You are so quick!
Ok im totally excited I don’t know what the hell I did but IIIII did something lol, if it isnt broken BREAK IT lol. Ok seriosly,
I ran the 1.8.13 and I got this wicked black X across the screen and then this haha,
“error logging result to database. (station=’32′, prd=’gen-mfi loader’- operation =’mfi’, fast=’false’ system.data. oracle client requires oracle client 8.1.7 or greater.
so anyways i made that go away and typed in start on my bb and whammo NOTHING
Hey steve, Make sure your internet is disconnected, that’s probably why it said error logging to the database
then i got a bsn # i can only assume they are talking about my serial #?
Hey Kush have you find the way to unlock the 8900 gsm with ten new security code? with MFI please let me know i just have one more try on mine before it get lock for ever.
Hi. I followed your instructions closely, but at the part where I plug the BB7290 after I started MFI Multiloader offline, nothing happens on the BB7290. no #1, the screen keep the same, never change, except for the light to come off. MFi stay at “Connect a device to begin…” I waited a full night. I tried with the BB7290 On and Off. MFi doesnt enter the “Pass” part. I was able to enter Blackberry Desktop Manager and install/updates application. But its still lock to Rodgers. I got a Blackberry 7290.
This might sound stupid, but did you connect the phone before opening the program? If so try opening the program prior to connecting the phone
Hello Kush. Thanks for the quick reply. Yes, program was open before I plogued the phone.
I tried again after a computer restart and it still doesnt go to the Pass status, always waiting for a BB to be connected. Full erase and Autostart are ON. When i plug it, I hear a USB pluging, unpluging and plunging sound. (3 sounds) I use XPSP3. is it a com port problem?
Yes, I would say it is a usb controller problem, try it on another computer.
I had same problem with you and found out the problem. The problem was my Desktop Manager. I had 5.0 DM. i uninstalled it and installed DM 4.7 and the problem solved.
Thanks for leaving a reply of how you fixed your problem Cash!
I keep getting a RIMRADIOCOM error when I try and unlock bold 9000. Internet is off all files done the right way still cant figure it out
That might be that your phone’s radio unit has been ruined (stewie’s accent). The only thing that I can think of is getting a replacement phone.
Hey Kush, thank you for your tutorial, but i gotta problem. MML1.8.1.3 doesnt see my Blackberry 8320.
I tried with and w\o disabling net connection.
I tried wiping with JL Cmder and reinstall OS with Desktop manager.
Can you please help me ?
Greets
I tried with another PC. And still nothing. I got the same problem with Zagguy.
Now i’m trying ,
-wiped phone wit JL cmder
-Installing another carriers OS
I will try again wit MML after these, i hope it works
I’d like to know so I won’t have to lose my time on this….does this work on BlackBerry flip 8220 or not.
Dear Kush,
I tried to unlock my BB Bold 9000. I have a problem with using the MFI Multiloader. Followed all the steps, but the MFI Multiloader doesn’t show the device. I keep waiting for minutes but nothing seems to happen. Need to go into the cal mode for unlocking the device. Tried everything and am very desperate now. Hope you can help.
OK. Got MML to show up the device.
Possible solutions for the problem:
1) Delete Desktop Software Version 5.0 and install Version 4.6.
2) Get rid of the MicroSD Card inside the Phone, if you have got one.
3) First start MML, then connect the BB.
But now i have got the RIMRADIOCOM Error. Anyone has a solution ?
Thanks.
OK. Solved the RIMRADIOCOM Error. You need to
manually include the dll-Files in the C:\MML\bin folder.
Follow these steps:
1) Open Command.com
2) Type regsvr32 c:\mml\bin\RIMRadioCOM.dll
3) Type regsvr32 c:\mml\bin\GRSNVLibCOM.dll
4) Type regsvr32 c:\mml\bin\BBCFPCOM.dll
That’s it. Now you should get your BB into the Cal Mode,
where the No. 1 stands into upright corner.
New Problem: BB says : No Application Linked. What do I have to do ?
I’ve had a user of this Tutorial send me a picture of what he has done, he has setup a blackberry unlocking station. He has three computers constantly unlocking blackberrys.When he sent me the email he had unlocked about 50, and that was a long time ago. Best of luck to Michael and to everyone else using this tutorial!
Thank you for contacting me Michael!
Ps. I really enjoy when someone contacts me letting me know that I have helped them!
Where can i find for starters these files?
I got on package that included MML 2.0.1.3. But i do not know which xml files i have to replace. Is that another download or is it the one in the update folder?
And which additional mml files are we talking about? where are these?
Thanks!
Pingback: How to debrand a Blackberry using MFI Multiloader « Kush’s Blog
hey i’ve tried unlocking a pearl 8120 and the process seems to be successful as all the items say disabled when i perform an “meppd”. However i still get an invalid simcard error when i place a sim in the phone. Any ideas?
can you tell me the exact process you followed?
ok, I think i was able to get it done after several tries. I disconnected my internet, ran the mml program , then after getting the pass on the program and the 1 on the screen, i unplugged the phone then entered “START” on the phones keypad, then deselected the options in the mml program, reconnected the berry then did ctrl+shift+alt+12 then chose the load vsm option, and browsed to the c:\mml\mep and selected the “VSM-11697-001″ file. what that did was debrand the phone. The phone no longer carried the company logo which i think was the reason why my phone was showing all fields as disabled when you perform an meppd , but yet still it gaved an invalid simcard error.
is it possible to unlock a blackberry that is password protected?
Yeah, you should be able to. Just put in the password before connecting it to mfi multiloader
Hi Kush,
I have been following of your instructions as mentioned in your blog however during the Nuking process I kept on getting the FAIL at the end it says: Retrieving the COM class factory for component with CLSID {6EDE3FE5…………….} failed due to the following error
: 8007007e. The display on my Blackberry 9000 now is just showing “No Application Linked . I didn’t get the ’1′ popping up on my screen….Could you advice me what has gone wrong?
Note: I have disconnected my PC from internet and have pulled out my simcard.
Thank you very much.
Mike
Hi , can any one help me, can i able to unlock BB 9530 Strome?
Hey vel, as of now no you can not use this software to unlock the blackberry storm
hi i bought blackberry storm 2 in local market and after few days it blocked i know i thought its cheap anyway is there anyway i can change imei on this phone so it will start work again i tried all software everything and find on google no joy. pls. help me dont know what to do as radio tool software dont work.
Hi Kush,
What other solution do you suggest current for the storm to Unlock. Is there anyother software in the market to unlock it.
Please help.
The easiest way is to unlock it on ebay, its not too expensive, but currently there is no free software that will do it.
If we have Desktop version 5.0 or later the MFI Loader will not work
it doesnt work on the storm.
hey, when you enter blackberry mep2 codes more than 10 times i understand they become permanently locked to the network they were tied to.Does anything different happen on the phone? are there any warnings? what difference is there when your phone is permanently locked?
hey, i have just done some thing really stupid, for a bout a week now i have been trying to unlock my bb8800 untill i stumbled onto this site, well i finally managed to get the mfi multiloader working but then it said my fone was password protected which am guessing made the whole process to be on pause so wat I DID WAS QUITE THE PROGRAME-in trying to do this i got a warning about making the system unstable if i quite BUT I QUITED ANYWAY AND NOW ALL AM GETTING ON MY BB IS A CROSSED OUT CIRCLE with a box inside it and 3small shapes inside the box with 507 written under neath it..is this now bricked and can ANY ONE HELP ME WITH THIS… THANX
Hey 16barz, that means your operating system has been wiped off the phone, you need to use blackberry desktop manager to restore the os on to your phone. To do that download desktop manager as well as downloading the latest operating system for your phone. If you do not know how to do that, go to http://www.crackberry.com and they have a forum where you can learn how to do so.
hi kush, just wanted to ask. can i use the MFI multiloader to just de-brand the bb tour 9630? as i have already unlocked the set, i just need to get rid of the verizon branding on the phone
and btw. is it true that the mfi multiloader only works on win xp sp2? i had win xp sp3 and it doesnt seem to load and keep giving the error sound.
Hey Kush,
I want to try this but the links you have been posting for the older version of mml keep getting wiped out. Got a fresh link for all the tools I need to unbrand and unlock my 8900?
Thanks m8
Actually, Kush.
I want to debrand my phone. I have the BB 8900. Many people I see with 8900 have it debranded. Has a way been confirmed yet? I have searched hi and low for the MML 1.8.1.3 and can not find it. I have a VSM pack I got from another site. I don’t want to get into this if it can’t be done.
Numerous sites have reported success and others, failure. I’d like your opinion and if you have any advice at all to give and guidance, I am all ears.
Thanks.
Hey Massive, I have not personally tried doing it since I now have an iPhone. A reader of my blog did a write up on how he did it, and i posted it on my website, you can find it here
can any1 share configuration.xml and flash image for storm 9500 that i can copy in manually please?
Hi, Kush
dont know if you got my email but I try to connect Radio Tool with my BB 8900 but got Error Log message in Radio Tool:
Radio Error: Timeout. Cannot reconnect to radio. The device may be password enabled. please ensure that the password is disabled before connecting.
Connecting with MFI does not work either and I have all the files (8 rar’s etc). Do I need to go in to cal mode in order to connect with Radio Tool?
My 8900 is unlocked never was locked, no SIM or Net Lock.
Hey Mike,
The MML software currently does not work with the Blackberry Curve 8900, and newer phones.
hi.
i have a same problem. i tried unlock my blackberry 9000 with mml.
but it failed with the error “Radio Error: Timeout. Cannot reconnect to radio. The device may be password enabled. please ensure that the password is disabled before connecting.”
my pin become 0000000
what do i have to do to save my blackberry. plz help me.
I just rececntly unlocked and debranded my Bold 9000, i want to rebrand it with the telus vsm but MFI wont connect anymore. Do you know which vsm file i should use to achieve this? the only reason i want to do that, is to set the carrier id on the phone so it hopefully wont be roaming all the time, so the phone thinks its a telus phone… Would this be possible?
I got mfi to connect, now i just need to figure out which mfi to use… i downloaded a package where someone categorized the files to the specific carriers… Just need to know which one would work the best for the bold 9000
Sorry Nathan, I have never tried to rebrand a phone. I’m not even sure that would solve your problem. If you really want to find out check out the forums on crackberry.com they will probably be able to help you better.
Unfortunately the moment you mention MFI multiloader on crackberry, they shut you down.. lol
Wow, I did not know that. How about asking them how to fix your problem, that way they would have to mention it. Maybe you can fix it without using MFI Multiloader. I’m sorry I can’t be of much help now, because I am using an iPhone.
MY BLACKBERRY 9530 DIVICE IN CAI MODE PLEA HELP
Just wanted to shoot a thanks to the people in their fourum, with your help and a couple of other posts i got this bold baby of mine unlocked, no thanks to rogers! suck it rogers.
Hiya i was wondering if it was possible to unlock and change the imei on my
blackberry storm basically one broke so i got a replacement so now i have two and was wondering if i could unlock the one which is blocked because i got the newer one and unlock it to all networks.
If you read at the top, it says this will not work with the storm, sorry.
I’ve successfully unlocked a number of Bold 9000′s. I’ve had a gap & came across another device I needed to sort… so…
I first of all upgraded all the software using the latest Desktop Manager (why?!?!?).
I downgraded to 4.6 & removed a corporate security policy that required a complex password (replacing the policy file during a restore).
I then, accidentally, used MML without checking the ‘nuke’ box (full erase).
The LED now flashes twice and eventually the following error is reported:
“Timeout. Cannot reconnect to radio. The device may be password enabled, please make sure the password is correct. Cannot connect to radio.”
Any ideas?
Hey Kush
I emailed you bit never got a reply!
Anyway, I found a BB 8220 phone and its on orange (contract) but it’s been locked. i guess!
I insurted my sim card and the signal showing SOS haha
Anyway, I did followin some stepfs of wipin the OS, “No Application Linked (Factory OS)” and tried to run the MML but it does not let me CLEAR THE MEP! it says
RTAS permission to access command denied. Cant get confirmation. Cannot set MEP data. Cannot load MEP file.
So I am stuck. What to do now?!
Plsss let me know, and notify to my email for ur reply.
THANK YOU
Good evening everybody I have a problem with my bb 9500 Storm is blocking my network since I introduced the wrong codes to unlock is there a way to unlock my network?
Well, when you enter the code, it should say how many retries you have. Most are more than 10, I’ve also seen some that are 255. This means you should have many retries.
Hey Kush,
Can you please send me a zip/rar of the working setup for the 9000 unit please. I have tried maybe 5 diff versions and all. They all fail at ‘making CCF’ or something of that sorts. Perhaps i have a bad MML.
Thanks.
John
I don’t think so, what version of windows are you running with which service pack.?
I used to unlock bold 9000 with it… .and many other but it seems that now they have done some update to the devices and that they dont get unlocked easily now… with the MML files.
is there any older version with you guys whihc can do the job for 8900 Javelin
i went through the steps and everything seems fine… however I am not able to send or receive data (phone calls or text) I am using a 8100 pearl… i went into advance settings and type “meppd” and shows every thing lock:
-SIM Disabled
-Network Disabled
-Service provider Disabled
-Corporate Disabled
I tried to type in “mepp2″ but it does not recognize it.
Please help
Hi Kush, just wondering if this will work on a Bold 9700. Thanks.
Hi Tim, sorry it doesn’t your best bet is to have your carrier unlock it or head on over to cellunlock.net
My phone is already unlocked, I just wanted to unbrand the phone but guess the 9700 is not supported with this program yet.
Hey Kush,
I’m'nt able 2 see 1 on d screen and PASS on the program. I’m using MML-2.0.2.3 for my BB-8320 Curve. Al I can see is No Application Linked Please suggest me.
Thanks,
Rupinder.
You need to reload the operating system as mml wipe the phone.
Thanx Kush, i’ve reloaded the OS bt still its d same…
For those of you who can’t unlock your blackberry try the cheapest/best remote unlocking service online. Remember to use the coupon code “crackb50″ to receive a 50% discount. Just click on the banner below.
I think i have done most stuff correct, not sure. i plug in my blackberry 8320 then on MML(version 1.8.1.3) it says ‘cannot create CFP instance.Please ensure the BBCFPCOM driver is registered’ Any thoughts anyone? probably a stupid mitake but first time doing this.
KUSH I HAVE MML 1.8 IVE UNLOCKED ALOT OF CURVES AND THEE 7100. I I SEE WHERE U SAID 2.0 WONT UNLOCK THE STORM. BUT WILL 1.8 DO IT. I GOT ALOT OF STORMS COMIN TO ME AND PEOPLE WANT THEM UNLOCKED. LET ME KNOW