Blackberry Unlock using mml 2.0.1.3

Here is the torrent file also if you have any questions ask here and I’ll try to reply asap!

This is including the storm and javelin! Sorry as of now the storm and javelin are not included if i figure out a way i will post!

Since a lot of people are asking how to use this I’ve updated the post to include instructions! Firstly this is only for GSM phones, do not try this on CDMA phones.

File Downloads: (this does not work with the curve 8900 or the Storm 9500, 9530 yet, So i recommend using v. 1.8.1.3)

FILES REMOVED DUE TO REQUEST FROM RIM (Search google they are easy to find)

1.Place the xml file in and replace the current one. (C:\MML\Configuration)

2.No longer need to disable the internet Unless you did not download and replace the configuration.xml(already done in the configuration.xml file posted above)

3.Backup your phone using Desktop Manager as Mml mfi multiloader will erase everything on the phone.( you will have to reload your OS software from desktop manager so download the latest version HERE)

4. Open mml MultiLoader without your phone connected and make sure both full erase and Autostart are selected.

Here is how MML will look if you are still connected to the internet (you don’t want this):

This is when you connected to the internet, you dont want this
This is when you connected to the internet, you dont want this

This is how it looks when you are offline:

This is how it looks when you are offline (you want this)
This is how it looks when you are offline (you want this)

5.Now connect your phone via usb, and wait for a minute or two. After its done it should display a 1 on your phone and pass on the mml Multiloader program. (sometimes you have to type start on your phone to finish the process, just look at your phones screen and it might say type “S” “T” “A” “R” “T” to start the phone) if you fail don’t worry keep trying until you get it right, its very hard to permanently brick a blackberry (yes I’ve done it once and it was very hard to do and I wasn’t following directions)

6. Afterward your phone should say “No Application Linked (Factory OS)” that’s no problem, just fire up desktop manager and reload your OS software and then do a restore of your personal data. Now you have an unlocked blackberry!

If you are having trouble with mass storage mode download the fix from above, and follow the directions and it will fix the mass storage problem!

1.Connect your phone to PC via usb cable

2. Open “mass storage activator.bat”

3.Follow instructions

Extra: to access the hidden Menu, press and hold (ctrl+shift+alt+F12)

If you have not been able to unlock your blackberry using this tutorial, or if your blackberry is not compatible with the unlocking software I have teamed up with Cellunlock.net to offer cheap blackberry unlocking. These guys are the best in the business and they have very cheap/fast service. Click on the banner below and remember to enter the coupon code “kush50” to get 50% off.

267 thoughts on “Blackberry Unlock using mml 2.0.1.3”

  1. The informations was really help full thankyou author, but i would like to ask for one more question. I have a blackberry tour 9630 and i have tried to use the MFI to unlock it and have failed a number of times. now my question is is there a link where i can download the MFI file for my phone? please help.

  2. Hey man, that’s alot for your software. I wanted to know if I can get the xml file… I dont have it. Thanks man.

  3. tengo un 9530 cuando presiono crear mep me dice (rtas permission to Access command denied. Can`t get confirmation. Cannot set mep data cannot load mep file)

  4. hi

    i have hard locked blackberry 9800 from at&t and no mep trial left to enter so can i use this mml 2.0.1.3 tool to reset all and able to unlock this phone or any other waY??

    please help!!!

  5. Hi, i got Pearl 9105 and trying to connect with MFI Multiloader. It detect the phone and i checked the Full Erase and Auto Start but it FAILS and showing Connecting to Bootrom. Does this MFI Multiloader works with Pearl 9105.

    Regards,
    Shan

  6. kush read ur entire post.
    i tried 2 understand all of it but couldnt
    i have curve 8520 bb
    i want to change imei and pin
    how can i proceed.
    could u mail() me a guide if u have with screen shots as on how to proceed,
    iv completed all d downloads..
    thnx in advance

    vidur

  7. I have download alot of files to unlock my BB it seems that MML can not find my phone.

    I tryed with two computer and I have the BB software installed and disconected from the internet.

    Why should I be disconected any ways?
    Email me at Major(Antispam)Roboto(at)Hotmail(Antispam)com (or .ca)
    (Where antispam is put a dot)

    • For All persons having problems with MML not detecting your bb’s anymore,
      The problem is cause by RIM’s new drivers. Just follow these steps that worked for me:

      1) Copy [BbDevMgr.exe] from the location C:\MML\bin\
      2) Overwrite the one in the location C:\Program Files\Common Files\Research In Motion\USB Drivers\

      MML Should connect again.
      If not, try un-installing the blackberry drivers from device manager and try the steps again

  8. Hi I want to know that i connect my blackberry but it gives me error that “cannot create CFP assistance. please ensure that BBCFPCOM is registered” and i registered this BBCFPCOM through command prompt but it still gives that error. so any sugesstion guys?

  9. For All persons having problems with MML not detecting your bb’s anymore,
    The problem is cause by RIM’s new drivers. Just follow these steps that worked for me:

    1) Copy [BbDevMgr.exe] from the location C:\MML\bin\
    2) Overwrite the one in the location C:\Program Files\Common Files\Research In Motion\USB Drivers\

    MML Should connect again.
    If not, try un-installing the blackberry drivers from device manager and try the steps again

  10. Hi Kush,
    I want to know that i connect my blackberry but it gives me error that “cannot create CFP assistance. please ensure that BBCFPCOM is registered” and i registered this BBCFPCOM through command prompt but it still gives that error. so any sugesstions?

  11. please kindly upload mfi file to unlock bb 8830 version 4.5 am using mfi setup 1.8.1.3
    is very urgent please am counting on you our thanks in advance

Comments are closed.